Tuesday, December 8, 2015

Kerio Control Installation and Configuration

Accessing Kerio Control

After installation, Kerio Control automatically detects your Internet and local interfaces. For successful detection of the network interfaces, connect Kerio Control to the appropriate networking equipment (e.g., modem, switch, access point and so on) prior to installation.
You can access the full administration from a web browser by inputting the IP address of the firewall. Note that your management computer must be in the same IP subnet as the firewall.
The Virtual and Software Appliance editions include a separate administration interface that the administrator can access directly from the operating system. This dialog box includes only essential features and is primarily useful when you are not able to access the web administration. Capabilities of this interface include:
  • Allow remote administration from untrusted networks
  • Perform a factory reset
  • Shutdown/restart
  • Configure TCP/IP parameters

Activating Kerio Control

When the administrator first logs in to the web administration interface, the Activation Wizard opens. The wizard sets the basic system parameters:
  • Select the default language
  • Confirm Internet Connectivity
  • Set the local date and time
  • Activate the license
  • Assign a password for administration
  • Set alerts and notifications
  • Enable management from MyKerio

Defining network interfaces and connectivity

Network interfaces in Kerio Control provide routing between local networks and the Internet. You must configure networking parameters and define your Internet connectivity before any other types of firewall configuration. The administrator can manage network interfaces and Internet connectivity inConfiguration → Interfaces. Capabilities include:
  • Organize interfaces into groups
  • Configure Internet link load balancing
  • Add VLAN interfaces
  • Create VPN tunnels
  • Assign TCP/IP parameters to network interfaces
  • Add interfaces for L2TP, PPPoE, or Dial-up connections
Other links you may like 
27

Windows 10 Installation

Microsoft today launched Windows 10 giving the millions of people who own Windows 7 and 8 computers a chance to obtain for free to the company’s latest operating system.
When you first boot the computer you’ll see a screen like this one:

Click Next and you’ll be taken to the Install now button screen. Which obviously you should click.

At this point you can choose whether you want to upgrade Windows or install a new custom install. Since we’re recommending that everybody install into a virtual machine or on a test PC, you should select Custom here.
Update: You should probably choose to Upgrade the first time, because the license key might not work otherwise.
At this point you’ll need to pick where to install Windows 10. You might need to delete or create a partition, but if you are using a virtual machine, you can just click Next.






And now it will install.
Once the PC reboots again, you’ll be able to select the settings like whether Windows Updates are enabled (they aren’t allowed to be disabled in the preview). We’d recommend just using the express settings if you are using a test machine — use Custom if you’re really going to use the computer.
And now you can sign into your Microsoft account. We’d recommend using a Microsoft account because otherwise you won’t be able to use half of the new features and you may as well use Linux or stick with Windows 7.
4

Windows 7 Installation



How To Install Windows 7 – Steps by step

Step#1 Turn ON your PC and Press ‘F2’ Continuously. There will come up and option to boot through CD/DVD. Select that option. Windows will start loading its files.


Step#2 Now you will get the Windows Setup Window. This is the part to select Language for your windows. Select ‘English’ and click Next. Also there will be a ‘INSTALL NOW’ button. Click on it and proceed to next step.
Step#3 There will be a license agreement. Check on ‘I ACCEPT’ and proceed to NEXT. After that there will be an option to install windows. ‘UPGRADE’ and ‘CUSTOM’. Right now we are installing a clean version so Click on CUSTOM.
Step#4 In this step you will do partitioning of your drive. Be careful, this is the most important part of the Installation. In this you will allocate spaces to your drive. If you want to create a new drive, simply click on a drive and then click ‘NEW’. A new drive will be created.
Step#5 When you have created the drives, Simply Select the drive in which you want to install windows. Click ‘Format’, this will erase all the previous data on you that drive. Click on ‘NEXT’ to proceed.
Step#6 Now you windows will start installing its files. Grab a cup of coffee and wait for a few minutes while it install. During this process don’t plug in or off your device. It might cause interruption and you might loose your data and have to begin the process all over again.
Step#7 Now when you files are installed. Your PC will be rebooted and now you will see is a ‘User Settings’ Screen. Simply add your Name and password and proceed to ‘NEXT’
Step#8 In this step you have to activate your windows. Simply look at the back of your Windows CD/DVD cover there will be a PRODUCT KEY. Add this key into your PC and Click ‘NEXT’.
Step#9 Now you have Installed you windows. Give the desired information the Windows Step guide will ask, like Time Zone, Update Timing and Your Computers location.
Now start and use computer.
2

Windows Server 2012 Installation

According to microsoft minimum hardware requirements for installing Windows server 2012.

Processor: Minimum:   1.4 GHz 64-bit processor
Ram: Minimum:            512 MB
Disk Space: Minimum:  32 GB
You can install windows server using DVD or bootable USB.
Step - 1 :- Insert media DVD or USB and select first boot.
when you seen press any key and installation will be start.
Once setup start next step you will face the below screen

Once you click Next, you can start the installation, click “Install now”

 In the following setup screen, you will see four options. Select Windows Server 2012 DataCenter Evaluation (Server With GUI).

After you click Next from previous screen, Read the License terms, tick the “I accept the license terms” and click Next.

Now It will ask you for the drive (or partition) you want to install Windows on. Here I’m installing it on the one partition I have here. NOTE: This will remove the content of the partition. Either you create a partition to install windows on, or you can test this on a testing machine

Now once we picked our partition, clicking on next from previous screen will start the setup. This process might take a while.

Once the setup is done, it will restart and start your Windows Server 2012 for the first time. It will ask you then to set up a password for the Administrator user

Once the setup is done, you can log in for the first time to your Windows Server, as the screen says, press Ctrl+Alt+Delete to log in, and use the password you set in the setup process


Other links you may like
1